%
(SET UP CODE )
N10 G90 G80 G40 F4 S2000 T01 M06
N20 G00 X.5 Z.75 M03

(PIECE ONE STARTS AT Z0.0 / PAWN CODE GIVEN / MAY REPLACE CODE STARTING HERE)
(FACING CUT)
N30 T03 M06
N40 G00 X.3 Z-.00 F1
N50 G01 X-.1
N60 G00 X.3
(FIRST GROOVING CUT – 1 INCH WARNING MARK)
N70 G00 Z-1.3375
N80 G01 X.2
N90 G00 X.3
(SECOND GROOVING CUT – CHUCK BUFFER WARNING MARK)
N100 G00 Z-3.45
N110 G01 X.2
N120 G00 X.75
N130 G00 Z.75
(FIRST ROUGHING CUT - HORIZONTAL)
N140 T01 M06 F4
N150 G00 X.2 Z.05
N160 G01 Z-1.3375
N170 G00 X.75 Z.75
(SECOND  ROUGHING  CUT – ARC RELIEF)
N180 T07 M06 F1
N190 G00 X.3 Z-.02
N200 G01 X.14
N210 G00 X.3
(GROOVE AT BASE)
N220 G00 Z-1.00
N230 G01 X.16
N240 G00 X.75
N250 G00 Z.75
(LEFT HAND LINEAR CUT / 45 DEGREE CUT)
N260 T05 M06 F4
N270 G00 X.3 Z-.8
N280 G01 X.2
N290 G01 X.14142 Z-.38142
N300 G01 X.2 Z-.24 
N310 G00 X.75 Z.75
(RIGHT HAND 90 DEGREE ARC)
N320 T01 M06
N330 G00 X.25 Z.15
N340 G01 X0 Z0
N350 G02 X.2 Z-.2 I0 K-.2
N360 G00 X.75 Z.75
(PARTING CUT / PIECE 1)
N370 T03 M06 F1
N380 G00 X.3 Z-1.3375
N390 G01 X-.1
N400 G00 X.75
N410 G00 Z-.25
(END OF PIECE ONE CODE)

(PIECE TWO STARTS AT Z-1.0 / INSERT CODE HERE)

(ENDING CODE  / KEEP THIS CODE TO 5S THE LATHE)
N1400 G00 X.75
N1410 G00 Z.75 M05
N1420 T01 M06 
N1430 G28
N1440 M02 M30
%